Buchi Distillation Unit K-355 User Manual download pdf (Page 19)

5 Putting into operation

19 K-355 Operation Manual, Version G

5 Putting into operation

This chapter describes how the instrument is installed and gives instructions on initial startup.

NOTE

Inspect the instrument for damages during unpacking. If necessary, prepare a status report immedia-

tely to inform the postal company, railway company or transportation company.

Keep the original packaging for future transportation.

5.1 Installation site

Install the instrument on a clean, ﬂat and stable base and place the tank for Reagent 1 (acid) below

instrument level (not more than 1 m). Place the other tanks on the same level as the instrument (not

higher and not more than 1 m lower).

ATTENTION

To ensure the instrument safety do not place any object on top of it.

ATTENTION

For safety reasons, make sure that the distance between the instrument and another object or a wall

is at least 30 cm.

ATTENTION

For safety reasons do not place any containers, chemicals or other instruments behind the instru-

ment.

5.2 Electrical connections

Fig. 5.1: Electrical connections

ATTENTION

Make sure that the voltage on the socket corresponds to the voltage given on the type plate of the

instrument.

Always connect the instrument to an earthed socket. External connections and extension cables

must be provided with an earthed conductor lead (3-pole couplings, cable or plug equipment) as the

mains lead has a molded plug, thus avoiding risks due to inadvertent defective wiring.

1 ... 18 19 20 ... 38

No comments

Buchi Distillation Unit K-355 User Manual Page 19