Buchi DuMaster D-480 User Manual download pdf (Page 124)

Operation Manual D-480 ©BÜCH Labortechnik AG

7 - Using the instrument 124

 ... switch off a signal, uncheck the appropriate checkbox.

 Click OK. This closes the dialog and saves the settings.

Configuring error handling

Reacting to irregularities

If irregularities occur during the analysis, it is important for the user to quickly identify any errors. In

the "Error handling" dialog the user defines how the analyzer is to react to incidents.

Incident

Consequences

During analysis, the computed element contents

exceed the defined tolerances.

If standard tolerance monitoring is enabled, the

analysis is aborted. Tol is displayed in the

information column of the particular sample.

A critical error occurs. The analyzer is stopped after the analysis.

A non-critical error occurs. If you have set the analyzer to stop after a set

number of non-critical errors and this number has

been reached, the analyzer is stopped after the

analysis.

Configuring error handling

Proceed as follows:

 Open the "Error handling" dialog in the operating software by selecting Options > Settings >

Error handling.

 If you want to enable standard tolerance monitoring, check the "activated" checkbox in the

"Standard tolerance monitoring" section. The tolerance thresholds are defined via Options >

Settings > Standards.

 If you want to abort the analysis after several non-critical errors, enter the number of errors in the

"No. of errors" textbox of the "Abort auto analysis" section. Enter 0 to ignore non-critical errors.

 Click OK. This closes the dialog and saves the settings.

1 ... 123 124 125 ... 356

No comments

Buchi DuMaster D-480 User Manual Page 124